BevGuard Water Filter
ADVANCED FILTRATION TECHNOLOGY
This BevGuard brand water filter contains a polyphosphate scale inhibitor and a 0.5 Micron compressed coconut shell carbon block. The scale inhibitor reduces the accumulation of minerals that lead to hard water spots from lime scale build up on equipment. The carbon block provides tremendous capacity to reduce impurities and sediment that may be present in your drinking water. The carbon block has millions of active sites on its surface and within the structure which can absorb impurities like a sponge, and can attracty and hold other types of impurities to its surface like a magnet. Additionally, this filter can catalytically breakdown other impurities very similar to the way a catalytic converter works in your automobile. These processes ensure that you are getting the cleanest and best tasting water possible.This economical filter will provide you with months of protection by reducing hard water build-up in any beverage or food equipment application.
CFS 8112-S 55817-08, CFS 8112-XS 56011-03,
CS-31 55817-22, CS-11 55895-01,
CS-71 55817-14, CS-21 55895-05
FILTER FEATURES:NSF CertifiedEconomical alternative to expensive filter substitutes
Delivers clean, clear water that looks and tastes great
Reduces sand, silt, sediment, rust, chlorine taste and odor that may be present in your drinking water
Significantly reduces hardness build up due to minerals present in the water supply
Designed to provide up to 20,000 gallons
Does not remove minerals which may be beneficial to health
Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system.
Micron Dimensions:12 1/4" x 3 3/16" (31.1cm x 8.1 cm)
Min Operating Pressure:25 psi (1.7 bar)
Max Operating Pressure:125 psi - (8.6 bar)
Operating Temperature:35-100Â°F (1.7Â°C - 38Â°C)
Flow Rate:1.67 gpm (6.32 lpm)
Life:20,000 gallons (75,708 liters)
*Cuno is a registered trademark of the 3M Company.